Nitrogen gas generator
CLSG6 serie
|
|
|
| |
|
|
F-DBS’s range of laboratory Nitrogen Gas Generators are some of best designed PSA Nitrogen Gas Generators
available.
A Gas Generator designed to supply a continuous flow of Nitrogen Gas at a predetermined pressure and purity.
The generator is specifically designed to supply the Caliper Life Science TurboVap® LV and TurboVap® II Concentration Workstations.
Removing the need for cylinder gases, the CLSNG6 Gas Generator supplies gas to the correct requirements with only a 3-pin electrical connection required on internal compressor models. The Generator is designed to run between 1 and 5 work stations, including internal storagte and automatic shut-down on low/no demand. The Generator is controlled using the
latest PLC and display technology to ensure faultless operation and ease of use.
Benefits and savings
Increased laboratory efficiency
A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders
and reduces the amount of instrument re-calibrations required.
Improved economy
Pure nitrogen gas produced as standard
Improved safety
Nitrogen produced at low pressure and ambient temperature removes the need for high pressure cylinders
Security of supply
Integral oil free air compressor as standard guarantees continuous gas supply, independent of in house compressed
air supply
Simple installation
Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.
| |
Standard features
- N2 flow-rate : 75 L/min at 4 bar
- N2 purity : < 98%
- Option : Integral oil free air compressor
- Digital display of pressure, model,
- Hours run meter
|
| |
|
The Nitrogen generator use pressure swing adsorption technology (PSA) to produce pure nitrogen gas
This technique uses a bed of carbon molecular sieve (CMS) to selectively remove oxygen and other contaminants from
atmospheric air. The bed alternates between purification and regeneration modes to ensure continuous nitrogen production.
The gas generator is designed to take compressed air at 7 barg from an integral oil free air compressor which is firstly
pre filtered. This filtered compressed air stream is then passed
to the CMS bed currently in purification mode. Whist passing
through the bed, the oxygen, carbon dioxide, moisture and some hydrocarbons are removed from the compressed air, resulting in a product stream of clean, dry, high purity nitrogen gas.
